Troubleshooting HASP, dongle and licensing issues
Posted by Jon Pearse on 21 March 2018 10:40 PM
Below is a flowchart to help identify which category your issue applies to. Troubleshooting sections for each category are below the flowchart.
Section 1 - Troubleshooting HASP errors
You may receive a HASP related error during the Intella installation process. Below you'll find a list of the errors which have been reported to us, together with the solutions for these errors.
Error code 27 (H0027)
Error code 33 (H0033)
HASP Error 33 means that the dongle driver has been blocked or deleted. This is usually because of security software such as antivirus software/firewall getting in the way or removing vital files.
Intella will need to be reinstalled to fix the issue. You will need to turn off your security software and then reinstall Intella as administrator. Also make sure that the Intella files and the Hasp files are added to the white list of any security software which you are running on the system.
If problem persists, open a Command Prompt (as administrator) and start the license manager by running:
net start hasplms
Tip: To open a Command Prompt as an administrator, select Start > Accessories - Right click on Command Prompt and select "Run as administrator".
Error code 41 (H0041)
Section 2 - Troubleshooting dongle not being detected issues
You may experience an issue where the dongle has been working fine, but then is suddenly not detected by Intella. You may get the HASP key not found (H0007) error when this happens.
There are several causes for this issue. The first steps to take are to check whether there is a hardware issue:
1) Make sure that the dongle is plugged into the computer properly. If you are using a USB hub, try plugging the dongle directly into the computer.
2) Disconnect the dongle, pause a few seconds, then reconnect it again. If the LED lights up, the application should be able to access the dongle. You may need to wait a few seconds for the dongle to be completely installed by the operating system.
3) Check if the USB port is functioning correctly. Disconnect all other USB devices from their respective ports and connect the HASP dongle to a different USB port. You can also try using a different USB device in the port which the dongle was not accessible to verify that the port is actually working.
If you are still experience problems with the dongle not being detected and it is not a hardware issue, it may be a software issue. One of the most common causes for a dongle not being detected is when the dongle driver has been blocked or deleted. As mention above with Error Code 33 (H0033), this is usually because of security software such as antivirus software/firewall getting in the way or removing vital files. You may be able to uninstall and reinstall the HASP driver to solve your problem by following these steps:
1) Temporarily disable any security software you have running on the system.
2) Open a Command Prompt (as administrator)
3) Change the bin directory of the Intella installation directory for Intella (e.g. type cd c:\Program Files\Vound\Intella\bin)
4) Once in the bin directory, run the following commands:
(i) haspdinst -kp (this stops the HASP service)
(ii) haspdinst -r (this removes HASP)
(iii) haspdinst –purge (this removes HASP completely)
(iv) haspdinst –I (this reinstalls HASP and starts the HASP service)
5) Add C:\WINDOWS\system32\hasplms.exe in the Exception list of the antivirus and firewall applications, for example:
After you have done the steps above, you can check whether your dongle is detected by your system by following the steps below on the computer with the dongle plugged in:
1) Open a web browser.
2) Copy and paste or type http://localhost:1947/_int_/devices.html into the URL field. The page that opens is called the Sentinel Admin Control Center or SACC. Note that no internet connection is needed as the SACC is local to your computer.
If you see your dongle then Intella should work. If you do not have the SACC, or you do not see your dongle, you will need to reinstall Intella as a full administrator on the system.
It is also possible that something has changed in your environment such as the deployment of security software, group policies etc. Check with your IT team to see whether a change that they have made is causing the issue.
Section 3 - Dongle not showing or updating to the latest version
Vound uses a 3 number licensing system for its products. For example, for release 2.0.1, the 2 refers to the major release, the 0 refers to the feature release and the 1 refers to the minor update release.
Dongle licensing is applied at the major release, and feature release levels, which means that you don't have to update your dongle for minor releases. For example, if my dongle is licensed for version 2.0, I will be able to run all versions that start with 2.0 such as version 2.0.0 and 2.0.1 etc.
Provided that your Maintenance Agreement (MA) is up to date, most dongle updates can be done automatically using the Dongle Manager program which is installed when Intella is installed. Dongle Manager has an option to 'check for updates', and will update the dongle if updates are available.
Information on using Dongle Manager to automatically update your dongle, and manually updating your dongle can be found at this link: http://support.vound-software.com/Default/Knowledgebase/Article/View/202/0/license-dongle-activation
If you can't see the latest version on your dongle after using Dongle Manager to check for updates, then the latest version is not loaded on the dongle. There are a number of reasons why an update will fail. These include:
1) Your MA has expired. Contact your Representative or the Sales team to renew your MA.
2) Your MA is current but you can't update to a major release (e.g. from 1.9 to 2.0). For major releases, you need to have at least 100 days of MA left to receive a major update. Contact your Representative or the Sales team to extend your MA.
3) Your dongle is full and the new license can't be installed. This happens occasionally with our older purple dongles (not the green or red dongles) as they have limited space and they can become full. We see this with customers who have been with Vound for some time and have many older versions of Intella on their dongle. This is not a big issue as the dongle can be cleared, and the new version (along with a few earlier versions for backwards compatibility) can be loaded onto the dongle. You will need to submit a support ticket as this involves manually updating the dongle.
4) Pending orders have not been applied to the dongle or have been applied in the wrong order. This can occur if you manually update your dongle using v2c files. Updates can be missed or applied out of order which stops the new license being applied to the dongle. You will need to submit a support ticket so the dongle can be fixed.
5) You run a product that is not normally use on the type of dongle you have. E.g. you have Intella Professional (which is usually on a standalone dongle) on a network dongle. In these cases we need to create a license at our end before you run Dongle Manager to do the update. You will need to submit a support ticket so the license can be made.
We have a video with more information regarding dongles and licensing at this link: https://youtu.be/5cKvxbcGrSY
Section 4 - Other issues related to dongles or HASP
If you have an issue with your dongle or HASP that is not covered in the above three sections, please submit a support ticket via our support site: http://support.vound-software.com/Default/Core/Default/Index
Note that it is extremely rare that a dongle will give trouble. When you receive dongle errors, it is most likely that the HASP software is not installed properly, or the License Manager is not running. The License Manager needs to be running on your system for the dongle to work. You can run some checks on your system to see if the drivers are installed and that the license manager is running.
HASP drivers Installed
Intella is shipped with the latest SafeNet HASP dongles. Intella is also packaged with the SafeNet HASP RTE installer.
When Intella is installed onto the system, the HASP drivers are also installed onto the system. Under 'Universal Serial Bus Controllers' in 'Device Manager' on your system, you should see the following three entries:
If any of these items have a red X or a yellow warning sign, they may not have been installed properly and the drivers should be installed again.
License Manager running
Follow these steps to make sure that the License Manager is running.
1) Open a Command Prompt (Start > All Programs > Accessories > Command Prompt)
2) Enter: sc query hasplms
3) Review the result which should look like this:
If you see 4 RUNNING under State then the License Manager is running.
You can also check the License Manager's status in the Services section of the Windows Task Manager. The status should show that the License Manager is running.
If the License Manager is not running, try right clicking on the Licence Manager and select 'Start Service'. If the service will not start, check the event log for entries relating to the HASP License Manager service. The event log should give an error message that can be used to help diagnose the issue.